Holes drilled through the hull for hand toggles and perimeter lines.

I drilled the 1/2″ holes through the hull at the bow and the stern that the hand toggles and perimeter lines will go through. The great news is that my end pours were definitely deep enough and I drilled through wood and epoxy as planned. The not-so-great news is that I was worried that I wasn’t going to get the holes drilled straight through the hull perpendicular to the center line, and my fears were somewhat justified. The holes aren’t perfect, but nothing else on the kayak is perfect either. I think that once the holes are saturated with epoxy and the hand toggles and perimeter lines are installed, that the fact that the holes are a little wonky won’t be so obvious.

Bow hole, starboard side (with flash).
Bow hole, port side (without flash).
Stern hole, starboard side (with flash).
Stern hole, port side (with flash).

I know that everything kind-of looks like hell right now, but these should look a lot better once everything is sanded smooth and gets a coat of epoxy. That goes for the hull and deck too. This is one of those times when I have to make things ugly in the short term, to make them pretty at the end of the process.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.